Plug & Play PID Programmable Ramp Soak Temperature Controller Kiln Pottery Glass

Plug & Play PID Programmable Ramp Soak Temperature Controller Kiln Pottery Glass
Plug & Play PID Programmable Ramp Soak Temperature Controller Kiln Pottery Glass
Plug & Play PID Programmable Ramp Soak Temperature Controller Kiln Pottery Glass

Plug & Play PID Programmable Ramp Soak Temperature Controller Kiln Pottery Glass
This plug and play PID Programmable Ramp and Soak (50 segments) temperature controller with Ceramic thermocouple, has a wide range of applications in controlling the temperature of Kilns, Ovens, Furnaces, pottery, Glass, Annealing… (for loading current up to 15Amp). This is an inexpensive and heavy duty plug and play controller box. All products are 100% Brand new, High performance and Top quality. Controller comes in Box with MANUAL. Its heavy duty kiln thermocouple can measure very high temperatures up to 2372 °F (1300 °C). To operate, you only need to plug the heater to the socket wire of the controller at the back, drop the sensor into the Kiln, turn on the power of controller and adjust it to your own requirements. 15 Amp Maximum current. Heavy duty input and output plug and socket wire. Equipped with circuit breaker switch 15Amp (instead of short life fuse). Equipped with 40amp SSR with large Heat sink. 90 to 265 VAC – 50 /60 Hz; No transformer or adaptor is required. Same as the input. 50 segments Ramp and soak PID control. Solid State Relay (max 15A – 24/240V AC) with zero voltage crossing switching. Type K 6pc Ceramic Kiln Thermocouple. 50 to 1300 °C. 3.2mm (diameter) x 190 mm (long) / (0.13″ x 7.5″). 3.3 ft (1m). 6 x (1 inch Pcs, two-hole insulator) Ceramic Tube. Oval shape: L=12.3 mm & W=10mm (L 0.5 & W 0.4). 150 mm (6.0 inch). Dual 4-digit LED display, 0.1 °C. 200x120x75mm (7 3/4 x 4 3/4 x 3). Up to 50 segments available for a program. 200 to 1800 °C (depends on input type). Be able to program different patterns with different segments. Thermocouple: (K, S, E, J, T, B, N) RTD: (Cu50, PT100). Linear Voltage and current:0-5V, 1-5V, 0-1V, 0-100mV, 0-20mV, 0-60mV, 0.2-1V(100-500mV), -20 -+20mV(0-10V) -5V- +5V(0-50V), -100 – +100mV(2-10V) Linear Resistor:0-80 Ohm, 0-400 Ohm. Voltage pulse to drive SSR. Less than 0.5S (configurable). 0.2%FS+- 0.1C(Cu50 cooper resistor compensation or ice point compensation) 0.2%FS+0.2C (TC input and internal compensation). Less than 0.01%FS. C Typical value is 50ppm/. C or 0.1. Cautomatically change to 1. C when the temperature is higher than 999. Dual line – four digit – LED display. Configurable for all inputs. AI MPT with auto tuning, adopting fuzzy logic PID algorithm. Auto/manual bump less transfer from front panel. Auto-tuning and manual tuning available. Absolute value high limit, Absolute value low limit, Deviation high limit alarm, Deviation low limit alarm. In some occasions, for example, in the heating process, when the alarm is set to as low deviation alarm, right after the power is turned on, the alarm will be triggered but there is no problem in the system, the alarm block function can solve this problem. In some particular application, 100% output ratio is not allowed when the power just turned on; soft start function is a great feature to solve this problem. Available, as feed of PLC or indicator or paperless recorder. Notes for customer outside North America. For international order, an US power cord is included. User can cut plug and socket wire and change it to the power plug and socket outlet that meets the local standard for the input and output. For countries that use 220-240VAC power line, the maximum control power of this controller is 3300 Watts. The item “Plug & Play PID Programmable Ramp Soak Temperature Controller Kiln Pottery Glass” is in sale since Wednesday, March 27, 2013. This item is in the category “Consumer Electronics\Wholesale Lots\Other Consumer Electronic Lots”. The seller is “rogersdini” and is located in Ontario. This item can be shipped worldwide.
Plug & Play PID Programmable Ramp Soak Temperature Controller Kiln Pottery Glass